CODES FOR RESEARCH

SUPERDARN RELATED CODES

SuperDARN fitacf data visualization software: go

IDL codes for plotting the backscatter power, Doppler velocity and width in the RTI (Range-Time Intensity) format and AACGM polar coordinate system. These codes were initially developed by Dr. Steve Milan at University of Leicester, UK and have been modified by me to fit the data analysis environment in our laboratory. Instruction is available here.

SuperDARN Map potential data visualization software: go-pot

IDL codes for plotting 2D high-latitude convection pattern derived with Spherical Harmonics Fitting (SHF) of the line-of-sight Doppler velocities of the SuperDARN (Ruohoniemi and Baker, 1998). Instruction is available here.

OPTICAL OBSERVATION RELATED CODES

UEC All-sky airglow imager data (SVALCAM) visualization software: go-scm

IDL codes for plotting the airglow images obtained from SVALCAM all-sky imager at Longyearbyen, Norway. Instruction is available here

OMTI All-sky airglow imager data visualization software: go-asi

IDL codes for plotting the airglow images obtained from OMTI all-sky imager at Resolute Bay, Canada. Instruction is available here

Resolute Bay Incoherent Scatter Radar (RISR) visualization software: go-risr

IDL codes for plotting the parameters obtained from RISR Incoherent Scatter radar in Resolute Bay, Canada. Instruction is available here

HFD RELATED CODES

HF Doppler data visualization software: go-hfd or go-hf1

IDL codes for plotting the HF Doppler data from a network of receivers in Japan. Instruction is available here.

SPACECRAFT RELATED CODES

Solar wind data visualization software: go-sw

IDL codes for plotting the solar wind and interplanetary magnetic field (IMF) data obtained from the ACE, Wind and Geotail spacecrafts. Instruction is available here.

Low-energy Neutral Atom (LENA) data visualization software: go-lena

IDL codes for plotting the Low-energy Neutral Atom (LENA) onboard the IMAGE spacecraft. Instruction is available here.

OTHER CODES

GPS scintillation data visualization software: go-scinti

IDL codes for plotting the scintillation data of the trans-ionospheric signal from the GPS satellites monitored at Tromsoe EISCAT site. Instruction is available here.